SNAKE BRACE

Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems.

• intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure
• the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole
• intended for a single user
• the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions
• the minimum strength of the construction should be designed according to EN 795 (if not in accordance with EN 795, the load bearing capacity may be reduced)
• Snake Brace can be loaded in any direction only if also allowed by the construction in which is anchored
• can be used only with compatible connectors with locking mechanisms according to EN 362
  
  

Weight: S 300 - 162 g (5.71 oz); M 300 - 395 g (13.93 oz)
Material: S - dyneema, alloy, steel; M - PAD, alloy, steel
Strength: 18 kN
Length: 30, 60, 90, 120 cm